With this 4-5t/h production line, the palm biomass pellets can be produced when the raw materials go through chipping, crushing (or grinding), pelleting, cooling, and packaging. The followings are the brief introductions of the machines adopted in 4-5 t/h palm biomass waste pellet plant.

BX216 Drum Wood Chipper
Wood chipper is used for processing tree limbs or trunks into smaller wood chips. It is mainly composed of base, feed inlet, cutter, body, blade and electronic control. The blades can be adjusted so as to produce chips of different sizes. There are disc wood chipper and drum wood chipper to be chosen. In this production line, we recommend you BX216 drum wood chipper.
Features of BX216 Drum Wood Chipper
1.With a wide application for chipping wood materials and processing biomass materials.
2.With the secondary-feeding system, the drum wood chipper can work more efficiently.
3.With its body made of high-strength steel, is shock resistant and firm.
4.A series of screens is able to meet your requirement for processing wood chips with different sizes.
5.With the hydraulic buffer system, this chipper can be easily maintained.

 Model BX216  Wood chip size   30mm
Feeding material size  230*500mm  Capacity  7-8t 
Blades amount  Power of main engine  55kw 
Roller turning  speed 590rpm  Feeding roller engine power  3-4kw 
Conveyor engine power  3kw Oil pump engine power  1.5kw 
 Weight  4070kg Dimension  1800*4900*1210mm 

 

drum wood chipper palm wood hammer mill

ZW120B Water Drop Hammer mill
This water drop wood hammer mill is specially developed for large or medium sized wood processing industry. The advantages we choose water drop hammer mill are shown as below.
1. The all-in-one base design makes the structure of the hammer mill steadier.
2. The advanced double-strike technology is adopted for the pulverizing chamber, the pedestal of which is of good rigidity and small vibration.
3. A variety of screens are available to choose.
4. Adopting the flexible opening device and elastic pressure screen mechanism, it is convenient to operate and maintain.
5. The internationally- advanced energy-saving technology is adopted.

 Model Capacity  Rotor diameter 
ZW120B 4.5-5.5 t/h  660mm 
 Main shaft rotate speed  Hammer linear speed  Grinding chamber width 
2980RPM   87m/s 1200mm 
 Hammer quantity Power   Normal air volume
156 132/160kw 130m3/min 

 

MZLH508 Ring Die Pellet Mill (three sets)
In this production line, three MZLH508 ring die pellet mills shall be adopted to meet the production requirement.
Features
1. With high efficiency, lower power cnsumption and stable operation.
2. With better transmission performance and less noise due to the imported bearings (NSK) & seals (NAK) equipped.
3. With longer service time due to the corrosion-resistant ring die made of stainless steel.
4. Attributing to the permanent magnet device, impurities can be removed during the pelletizing process.
5. The stand-alone oil lubrication system is more effective in maintaining lubrication and keeping the bearings from abrasion.

 Model  MZLH508 Capacity 1.5t/h 
 Main motor power 90kw  Screw feeder power  2.2kw 
 Ring die inner diameter 508mm  Ring die rotate speed  150rpm 
 Roller outer diameter 190mm  Pellet size  6mm, 8mm, 10mm etc. 
 Roller quantity  Roller working temperature ≤85℃ 

 

palm biomass waste pellet mills pks pellet cooler efb pellet packer

SKLN4 Pellet Cooler
The SKLN4 cooler is adopted for this palm biomass pellets production line.
Features:
1. Advanced counter-flow cooling principle is adopted, avoiding surface of the pellet from being cracked.
2. The pellets can be cooled evenly and sufficiently due to the octagon cooling design.
3. Stable operation can be ensured and materials can be reduced due to the equipped reciprocal slide valve.
4. Closed air entry system is adopted to enlarge the area of inlet air, thus ensuring efficient cooing effect and avoiding cross contamination.
5. It consumes less energy and it can be easily operated.

 Model SKLN4 Production capacity  3-5t/h 
 Cooling volume 4m Cooling time  ≥6-10min 
 Power  1.5kw  Air lock power 0.55kw 

 

WDCS-50 Biomass Pellet Packing Machine
Main features of packing machine:
1.With simple structure and flexible operation.
2.Highly automatic and precise in weighting and packing.
3.Easy to assemble, operate, and maintain.
4.With accurate weighing & packing performance.

 Model Capacity  Power  Dimension 
 WDCS-50  3-4bags/min(5-50kg/bag) 2.2kw  2*0.8*2.6m